Small PET Bottle Blowing Machine by Stretch Blow Molding Process / PET Blowing Machine Working
Advantages of one step injection stretch blow molding machine (ISBM machine)
Along with the increasing requirement to high quality and outlook appearance, the products manufactured by the old style extrusion blowing machine cannot fulfill the customer demand any more, the whole process including moulding injection,stretch blowing and off-moulding can be finished within one step if using the injection blowing molding machine for manufacturing, the product making machine does not contain any flash, sprue and much less disfigurement, it can present the perfect looking mouth, bottom and parting line as well as the better transparence an higher rigidity, the injection blowing molding products are thinner than old style ones, which can save 50% material, besides the merit mentioned above, the one step injection blowing moulding machine perform the higher speed and more efficient energy saving.
- It creats preforms, stretches, and blow them on the same machine before cooling.
- All processings from resin to bottles are done with one machine.
- Much less start-up funds than two step blow molding process.
- Full automatic production and no flash or trimmings.
- No secondary heating needed and energy saved by at leat 50%.
- Multicavity, short cycle time and high output.
- Advanced and accurate PID temperature control system.
- Hot runner with valve gate type is also available for higher preform gate finishing and wider processing window.
- Can use recycling material and combined with the optimized and improved procedures, it achieves the best efficiency and cost.
Equipment parameters and process are set by HMI for living supervision of the equipment operation and its matching up with the panel switches and buttons, enables convenient, direct and efficient operation.
Flawless Bottles / Containers Made
- Mass production free of contamination defects. Glossy surface, precise neck finishes, uniform wall thickness and rigidity.
- Well fulfill the hygienic requirement for food grade containers.
- Fixed orientation. This is especially beneficial for bottles using a dispensing closure and requiring an oriented neck finish.
- High precision in bottle neck and screw, best seaming with almost invisible parting line.
- Final containers are of glossy surface, uniform wall thickness and rigidity.
- Modular design so only need to change the molds to make bottles of different shape or style.
Data Sheet of JASU Injection Stretch Blow Molding Machine (ISBM machine)
Screw L/D Ratio
Theoretical Injection Capacity
| Injection Pressure
| Max. Hydraulic Pressure
| The Actual Injection Quantity
| Screw Stroke
|| Blow Clamping Force
| Clamp Tonnage
| Wheel Diameter
PP, PET, PETG, Tritan, PS, PC
PC, PETG, Tritan, PS
| Open Vertical Mode Trip
|| Max. Pump Pressure
| Servo Motor
| Mode Opening/Locking Motor (Double Pump)
| Electric Power
| Tank Volume
| Dimension of Machine
| Machine Weight
|--Parameters are subject to change without prior notice.
--Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements.
One step injection stretch blow molding machine is widely used for various plastic materials and has broad application prospects.
Applicable to various resins including PET, High transparent PP, PCTG, PETG, SAN, PC, PMMA, PS, Tritan (BPA Free) etc.
Widely used for manufacturing bottles for pharmaceutical, healthcare, food, beverages, cosmetics, lampshade and other applications.
1. Food and beverage bottles such as kettle, jar, can, tin, cruet etc.
2. Cosmetic bottles and detergent bottles such as shower gel bottle, perfume bottle and hand washing liquid bottle etc.
3. Baby feeding bottles and sports bottles such as student bottle, vacuum bottle, juice bottle, baby feeding bottle etc.
4. Pharmacy bottles such as hand disinfectant bottle, medicine bottle, eyedropper bottle, oral liquid bottle etc.
5. Wine goblet, water bottle, juice jug, beer jug, milky tea jug, wine jug and soft drink bottles etc.
6. Lampshade, lamp chimney, LED bulb housing, big safety bulb housing, irregular bulb housing Φ30-Φ80, Φ80-Φ300, lotus bulb housing etc.
7. Jerry cans, other irregular plastic bottles and irregular plastic containers etc.
JASU is the first PET Bottle Machine Manufacturers of Single Stage PET Blowing Machine
Absorbed the advanced technology from Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D center.
Obtained a number of technical patents.
Overseas sales increase 33% annually.
Market network throughout the country , and export to many countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Service technicians (holding visa and passport) are on call and able to serve on site and instruct via voice and videos.
Question & Answer
Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer in the line of injection blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong Province, China, about 48 minutes by high-speed railway from Hong Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both parties' discussion) and settle the balance payment prior to delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed a good reputation among customers from Europe, Russia, Southeast Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey, Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India, Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa, Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always attach great importance to quality controlling from the very beginning to the very end. Our factory has passed ISO and CE certification. Patents and many other certificates obtained also tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty. During this period, if you need any support on installation, adjustment , operation or maintenance, our engineers can go abroad to fix for you.
A7: We will request the working voltage and power frequency at the buyer's side upon placing the order.
- Each order will be fulfilled as a turn key project of machine.
- We will check and test the machine and send the video to the customer for reference prior the delivery.
- Attache/send an operational manual in English version with the shipment.
- To use the machine only need to connect power and connect to the air supply and water supply according to the manual or video instructions if requested.
- Service technicians are on call to instruct via voice and videos. They all hold visa and passport and be able to serve on site.